Vega S17

Your whole DTF line. One machine. One operator.

Scroll

1Operator

One person sends the file and walks away. It prints, cuts, powders, cures and stacks on its own.

100Sheets unattended

Stacked and ready before anyone has to walk over. Lift the stacker out and it runs to the end of the roll.

0Powder handled

Sealed in a cartridge and applied automatically. Nobody scoops it and nobody breathes it.

67dB(A)

Or less, on the shop floor. Enclosed, three-stage filtration, no ventilation ducting to install.

Step 03 · Cut

Sheets that fit the press you own.

Trimmed inline in 0.8 seconds, at any length from 10 to 19.7 in.

15.5 × 19 infits a 16 × 20 in platen

Step 04 · Powder

Powder loads like a cartridge.

Seat the cartridge, and that is the last time you touch powder. One cartridge runs one full roll.

0times an operator handles powder

Step 05 · Cure

The cure is already dialed in.

320 °Fheld automatically across all four zones, every sheet

Enclosure & footprint

It fits the shop you already have.

Fully enclosed, with three-stage filtration that captures fumes and fine adhesive powder. No ducting to install.

31.4 indeep — rolls through a standard door

Support

It tells us what is wrong before you call.

Every job, temperature and error code is on the panel, and the machine reports its codes back to support.

USsupport and parts, from our own team — not a time zone away

Ask about the Vega S17 See full product page

Vega S17 · Powered by Color Prime · Engineered and built in Korea. Specifications are subject to change; confirm current specifications with DTF Station before ordering.