Shakers & dryers · 36 in

Miro 36 Pro

The 36 in shaker built for high-volume production

An extra-large shaker and dryer for printers up to 36 in, rated for up to 237 sq ft per hour.

Miro 36 Pro
36 in
working width
3100 W · 110 V · 2 cords × 14.1 A
power
500 lb
weight
Bottom, upper and curved heating platens
in short
Features

How the Miro 36 Pro sets up

The Miro 36 Pro from the back, its powder module with the touch screen beside the white-lidded curing oven
Two modules

Powder and curing, side by side

The powder module, with the touch screen, and the curing oven each roll on their own casters and are cabled together. Split like this, as seen here from the back, each rolls through a standard doorway; they are joined on the shop floor during installation.

A Prestige X6 feeding printed film into a Miro 36 Pro
Behind a 36 in printer

The full width of an X6

Printed film comes off a Prestige X6 straight into the powder module, across the whole 36 in width, then through curing and onto the take-up roll.

Tech specs

Miro 36 Pro

Working width36 in
Power3100 W · 110 V · 2 cords × 14.1 A
CircuitThis machine has two power cords, and each one needs its own circuit. On 110 V each cord draws 14.1 A and goes on its own 20 A circuit; on 220 V each draws 7 A, again on separate circuits. Never put both cords on one circuit, a power strip or an extension cord — plug each directly into a wall outlet. Confirm requirements with us before installation.
Dimensions (W×D×H)43.3 × 76.4 × 32.4 in
Weight500 lb
Pairs withPrestige X6 · Epson SureColor G6070 · Mimaki TxF300-75 · Mimaki TxF150-75 · any 36 in DTF printer

Spec sheet PDF User manual Setup video Warranty policy

Want to see it run first?

Request a live demo and watch the Miro 36 Pro in line with a Prestige printer before you decide.

Book a demo