In line with the printer
Prints come through powdered and cured
Twenty-four-inch film from an XL2, XL2 Pro, XL3 or XL4 runs straight through: powder, cure, out the front.
Shakers & dryers · 24 in
Miro 24
The 24 in shaker with the extractor built in
A 24 in shaker and dryer with a built-in fume extractor.
- 24 in
- working width
- 1700 W · 110/220V
- power
- 221 lb
- weight
- Built-in fume extractor
- in short
Features
What is inside the Miro 24
Under the lid
Everything reachable
The lid lifts on gas struts to expose the whole curing plate and the heater, for cleaning or a jam.
Powder roller
An even coat across the width
The powder roller carries an even coat onto every sheet across the full 24 in.
Built-in fume extractor
Fumes go through the filter, not into the room
Two extraction fans in the lid pull curing fumes through a filter, so the machine does not need a separate extractor beside it.
Roll feed
Feeds from the roll
A motorised roll holder on the input side feeds film from the roll.
Control panel
Temperature and speed at a glance
A panel on the side of the machine sets the plate temperature and the belt speed, with the power switches beside it.
What you will actually touch
Tech specs
Miro 24
Working width24 in
Power1700 W · 110/220V
Dimensions (W×D×H)59.6 × 30.2 × 22.4 in
Weight221 lb
Pairs withPrestige XL2 · XL2 Pro · XL3 · XL4
Complete the line
What it runs behind
The Prestige printers this shakers is matched to.
Printer · 24 in
Prestige XL2
A full 24 inches, built to run every day. The move onto a production floor.
See the printer
Printer · 24 in
Prestige XL2 Pro
Nine colors at 24 inches. For the shop that sells on color.
See the printer
Printer · 24 in
Prestige XL3
Three heads and nine colors. For a floor with standing orders.
See the printer
Printer · 24 in
Prestige XL4
Four heads, one pass. When output is the constraint.
See the printerWant to see it run first?
Request a live demo and watch the Miro 24 in line with a Prestige printer before you decide.
Book a demo