In line with the printer
Printed film feeds straight in
Film comes off an R1 or R2 Pro and into the powder section without being handled, so the shaker sits in line behind the printer rather than beside it.
Shakers & dryers · 14 in
Miro 13 Max
The shaker for a benchtop printer
A 3-in-1 desktop shaker: powder, cure and extract fumes in one unit.
- 14 in
- working width
- 1170 W · 110/220V
- power
- 77 lb
- weight
- 3-in-1 powder, cure and fume extraction
- in short
Features
What is inside the Miro 13 Max
Cure and extract
Heater and extractor under one lid
Lift the lid and the whole path is in view: the heating plate that cures the powder, and the fan above it that pulls fumes out through the filter.
Fume filter
A filter you change, not a room you air out
The extraction fan pulls curing fumes through a filter cartridge at the back. It slides out to be replaced.
Roll feed
Feeds from the roll
A motorised roll holder on the input side feeds film from the roll, so a long run does not need sheeting first.
What you will actually touch
Tech specs
Miro 13 Max
Working width14 in
Power1170 W · 110/220V
Dimensions (W×D×H)40.0 × 23.6 × 18.5 in
Weight77 lb
Pairs withPrestige R1 · R2 Pro
Complete the line
What it runs behind
The Prestige printers this shakers is matched to.
Want to see it run first?
Request a live demo and watch the Miro 13 Max in line with a Prestige printer before you decide.
Book a demo