See what's new at PRINTING UnitedNew at PRINTING UnitedBooth 3268 · Las Vegas · Sept 23–25Book a demo
ContactShop — dealer and account ordering

Prestige R1

Prestige R1 - Pilot Software - Setting the Correct Port and Changing the Language Pilot Program

Every step links to its own moment in the video, so you never hunt for the right part again.

  • 6 steps
  • 20 instructions
  • 1 video
  • Updated 2026-04-20

Restore English Language in DTF Station Pilot – Prestige R1

  1. 0:01Overview and When to Use This Guide
  2. 0:34Save Connection Settings
  3. 1:06Step 2 – Change Language to English
Written steps6

Overview and When to Use This Guide

Watch this part0:01
  1. Identify unreadable or incorrect language displayed in DTF Station Pilot.
  2. Confirm a red blinking symbol is visible in the bottom-left corner of the software.
  3. Verify the printer is not currently communicating with Pilot.

Step 1 – Reconnect the Printer to Pilot

What you need

  • Example IP shown: 192.168.127.58
  • Last two digits may vary
  • Server IP always ends in.10
  1. Navigate to the last main tab on the right side of DTF Station Pilot.
  2. Click the last subtab within that tab.
  3. Select the first icon, which is the only active option for printer connection.
  4. Open the drop-down menu.
  5. Select the correct Ethernet port.

Save Connection Settings

Watch this part0:34
  1. Click the button on the left side to save the setting.
  2. Click OK.
  3. Close the pop-up window.
  4. Wait for the green solid indicator light confirming connection to Pilot.

Step 2 – Change Language to English

Watch this part1:06
  1. From the same tab, click the second button from the top.
  2. Open the language drop-down menu.
  3. Select English.
  4. Press the button on the right side.
  5. Click OK.

Restart Pilot Software

  1. Close DTF Station Pilot completely.
  2. Reopen the software.
  3. Verify all text is now displayed in English.

Technician Escalation

What you need

  • If language does not change after restart, contact DTF Station technicians

Stuck on a step?

Our US tech team answers on Discord, and it is the fastest route to a person who knows this machine.

Get support