Prestige R1 - Hoson/Print Exp - How to Import your Firmware and Perform X Gear Ratio

SECTION (00:00:20) Accessing Advanced Settings

1. Open HosonSoft
2. Go to the Advanced menu
3. Enter the password 61
4. Press Enter SECTION (00:00:40) Importing Firmware
5. Select Firmware
6. Click Import Firmware
7. Locate and select the saved or default firmware file
8. Click Open
9. When the import options window appears, select all options
10. Press OK
11. Confirm the successful import by clicking OK SECTION (00:01:05) X Gear Ratio Adjustment
12. Locate the Gear Ratio setting
13. Change the value to 100 mm
14. Do not use 1000 mm, as this will cause an error
15. Click Check
16. Confirm the print head carriage moves left and returns to position SECTION (00:01:25) Finalizing Setup
17. Click File
18. Select Save
19. Press OK
20. Click Operation
21. Select Initialize

• If no firmware file is available, request the default firmware from DTF Station Tech Support