See what's new at PRINTING UnitedNew at PRINTING UnitedBooth 3268 · Las Vegas · Sept 23–25Book a demo
ContactShop — dealer and account ordering

Prestige R1

Prestige R1 - Hoson/Print Exp - How to Change the Stand-by Auto Cleaning Time

Written out step by step, with the video alongside.

  • 1 step
  • 18 instructions
  • 1 video
  • Updated 2026-04-20

Prestige R1 – How to Change Auto Cleaning Time

SECTION (00:00:01) Accessing Factory Mode

Written steps1

Steps

  1. Open DTF Station Pilot
  2. Go to the Advance menu
  3. Ensure you are in the Factory section
  4. Click on the password field
  5. Press and hold the Control key on your keyboard
  6. While holding Control, press F12
  7. Confirm button will change to Factory Mode
  8. Enter password: 62s
  9. Press Enter to open Factory Mode SECTION (00:00:30) Navigating to Maintenance Settings
  10. Select the Maintenance tab
  11. Ensure the Standby box is checked SECTION (00:00:45) Adjusting Auto Cleaning Time
  12. Locate the Clean Cycle setting
  13. Change the value to 240 minutes or your preferred interval SECTION (00:01:05) Saving and Applying Settings
  14. Click File
  15. Select Save
  16. Press OK
  17. Go to Operation
  18. Select Initialize SECTION (00:01:25)
  • Recommended setting is 240 minutes (4 hours)
  • Auto cleaning time adjustment is complete

Stuck on a step?

Our US tech team answers on Discord, and it is the fastest route to a person who knows this machine.

Get support