Pilot - How to Download DTF Pilot

This guide explains how to download **DTF Station Pilot**, verify computer requirements, and prepare your system for installation. Pilot works alongside **DigiRIP**, which converts images into print-ready data that Pilot sends to the printer. System Requirements

• **Windows PC only**
• Not compatible with:
• macOS
• Tablet PCs
• Microsoft Surface Pro (considered a tablet PC)

Locating the Pilot Download

• Operating System:
• **Windows 11 or later**
• CPU:
• **Intel i5 or i7**
• **2.6 GHz or higher**
• Storage:
• **500 GB+ free space**
• **SSD recommended** (preferred over HDD)
• RAM:
• **Minimum 8 GB**
• More RAM recommended for better performance

1. Locate the **Quick Start Guide PDF**: From the USB thumb drive included with the printer
2. Open the PDF.
3. Click **Important Resources**.
4. Select **Download DTF Station Pilot**. Model & Compatibility Check

• Or provided by your dealer

• Pilot version varies by printer model.
• Locate the **serial number sticker** on your printer.

Downloading Required Files

• May require:
• **Motherboard upgrade**
• **Firmware update**
• Pilot may not be compatible without these updates.
• Contact **DTF Station Technical Support** to confirm.

1. Open the **DTF Station Pilot Program Upgrade** folder.
2. Download: Pilot installation package Antivirus & Firewall Preparation

• Motherboard upgrade package
• Firmware configuration files

Recommendations: Final Pre-Installation Checks

• Windows Firewall or antivirus software may:
• Block installation
• Delete files during setup
• Temporarily disable antivirus **or**
• Add Pilot as an **authorized/allowed program**

• Open your **Downloads** folder.
• Verify all required files are present.

• Ensure your computer has an **Ethernet connection**.
• If using a laptop:
• Most newer models require an **Ethernet adapter**.
• Proceed to the Pilot installation and network setup video.
• Ensure firmware and motherboard compatibility before installing Pilot.