How to Use Choke Tool to Eliminate White Peek - Neostampa

This guide explains how to use the **Choke** tool in NeoStampa. Choke is a pre-press feature used to reduce unwanted white lines or gaps between colors caused by slight print misregistration. Preparing the Raster Preview

1. Open **Raster Preview**.
2. Click **Print**.
3. Select **Process Only**.

1. Go to the **Job Queue**.
2. Right-click the processed file.
3. Click **Raster Preview**.

1. Deselect all ink channels.
2. Leave **Black** and **White** selected.
3. This view shows exactly where white ink is being applied. Applying Choke

1. Go to the **Properties** panel.
2. Locate and click the **Choke** option.

1. Reduce the white ink layer slightly using the choke value.
2. Start with **small values**.
3. This helps prevent overlaps and visible gaps between colors.

Review & Print

• Modify edge behavior for:
• Smoother curves, or
• Sharper, cleaner corners

1. Re-check the **Raster Preview**.
2. Confirm white ink coverage looks clean and consistent.

Best Practices Choke adjustment workflow is now complete.

• Once satisfied, send the job to print.
• Test on actual fabric to fine-tune choke settings if needed.
• Always start with minimal choke values.
• Review raster preview before printing.
• Test adjustments on fabric for best results.