How to remove devices on DigiRIP Pro

1. You cannot remove a printer driver or device if any queues are running.
2. Close all active queues before proceeding.
3. If there are jobs: Running You will not be able to remove the device until they are cleared.

• Pending
• Reserved

1. Go to **Queues**.
2. Locate the queue associated with the printer you want to remove.
3. Delete the queue.
4. Confirm there are no remaining jobs in: Active queues

• Example shown: **Prestige R2**.
• Reserved jobs

1. Go to **Devices**.
2. Click **Manage Devices**.
3. Locate the printer you want to remove.
4. Select the device.
5. Click **Remove Device**.

• Example shown: **Prestige R2**.

1. To reinstall the same printer or add a different printer, click **Add Device**.
2. Select the printer model you want to install.
3. Click **Next**.

• Example shown: **Prestige XL2**.

1. For certain models (example: **Prestige L2**), you will need to configure **TCP/IP**.
2. Follow the on-screen prompts to complete the TCP/IP setup.

1. Once setup is complete, return to **Devices**.
2. Confirm the printer driver now appears in the device list.

This completes the process for removing and reinstalling a device in DigiRIP Pro.