See what's new at PRINTING UnitedNew at PRINTING UnitedBooth 3268 · Las Vegas · Sept 23–25Book a demo
ContactShop — dealer and account ordering

NeoStampa

How to Create New Media in Neostampa

Every step links to its own moment in the video, so you never hunt for the right part again.

  • 5 steps
  • 11 instructions
  • 1 video
  • Updated 2026-04-20

NeoStampa — Changing Media Width

  1. 0:03Overview
  2. 0:101. Open a New Job
  3. 0:182. Adjust Media Width
  4. 0:383. Create a New Media Profile
  5. 0:504. Manage Predefined Sizes

Example Printer: Prestige R2 Pro

Written steps5

Overview

Watch this part0:03

This guide explains how to change and save media width settings in NeoStampa using the Prestige R2 Pro as an example. Changing Media Width

1. Open a New Job

Watch this part0:10
  1. Click the **New Job** icon.
  2. Open the correct **print scheme** for your printer.

2. Adjust Media Width

Watch this part0:18
  1. Locate the **Media Width** setting.
  2. Default media width is **13 in**.
  3. Right-click on the media width to change the unit of length: Inches
  4. Change the media width to **12 in**.
  5. Observe the media preview shrink.
  6. Change the value back to **13 in** to see the media preview expand. Saving a Media Profile
  • Millimeters
  • Centimeters

3. Create a New Media Profile

Watch this part0:38
  1. Click **New**.
  2. Adjust the following fields: **Format Name**
  3. Select **12 in** as the page width.
  • **Page Width**

4. Manage Predefined Sizes

Watch this part0:50

Media width setup and profile creation are now complete.

  • The new **12 in** media profile will appear under **Predefined Sizes**.
  • From here, you can:
  • Remove the profile
  • Edit the profile
  • Add margins if needed

Stuck on a step?

Our US tech team answers on Discord, and it is the fastest route to a person who knows this machine.

Get support