How to Back Up Firmware and Firmware Parameters for Pilot

This guide explains how to export and save your **firmware configuration** and **firmware configuration parameters** in DTF Station Pilot. Exporting these files is essential after calibration or any settings changes and provides a reliable backup in case of power outages, motherboard issues, or software problems. ⚠️ Always export BOTH files together. Why This Is Important Export Firmware Configuration

• Protects against:
• Power outages
• Motherboard damage
• Software bugs or corruption
• Allows fast restoration of a known-good configuration
• Prevents mismatched settings that can cause unexpected behavior

1. Launch **DTF Station Pilot**.
2. Click the **Advanced** tab.
3. Enter the password: **61s**
4. Click **Confirm**.

1. In the Advanced window, go to the **Firmware** tab.
2. Click **Export Firmware Configuration**.
3. Choose a location you will remember.
4. Name the file clearly (recommended format): `PrinterModel_Date_FirmwareConfig`
5. Click **Save**. Export Firmware Configuration Parameters

1. Stay in the **Firmware** menu.
2. Click **Export Firmware Configuration Parameter**.
3. Save the file in the **same folder** as the firmware configuration.
4. Use a matching name for consistency: `PrinterModel_Date_FirmwareParameters`
5. Click **Save**. Critical Rules Backup Best Practices

• ALWAYS export **both files together**.
• NEVER mix:
• A new firmware configuration file
• With an old parameter file
• Mismatched files can cause:
• Startup errors
• Incorrect printer behavior
• Failed restores
• Store copies:
• Outside the computer (cloud storage, external drive, or email)
• Keep backups organized by:
• Printer model
• Date
• Re-export files:
• After calibration
• After changing Pilot settings
• After firmware or motherboard updates
• Firmware configuration and parameters are now safely backed up.
• Files are ready for recovery if needed.