How to Add Prestige R2 Driver

This video explains how to install and add the Prestige R2 printer driver in DigiRIP.

1. Click “Devices.”
2. Select “Manage Devices.”
3. Click “Install Printer.”

1. Look for “Prestige R2” in the printer list.
2. Select it.
3. Click “OK.”

1. Allow DigiRIP to search for the new printer package.

1. When prompted for port setup, select “TCP/IP.”
2. Enter the IP address as 127.0.0.1.
3. Click “OK.”
4. Click “Next.”
5. Click “Finish” to complete installation.

1. After installation, confirm the driver appears in your device list.
2. Verify the available print modes: Production R (Speed R): 36 × 1080

• Production Res Z: 36 × 1800
• White Graphic: 36 × 1080 (white print mode)

The Prestige R2 driver is now installed and ready for use in DigiRIP.