Digirip - How to Import a New Print Mode

This video explains how to import and configure a new print mode so it is ready for use.

1. Click on “Devices.”
2. Select “Manage Print Modes.”
3. Click “Import Print Mode Package.”

1. Click the three-dot icon.
2. Locate and select the provided print mode file.
3. Click “Yes.”
4. Check the “Import” checkbox.
5. Click “Import” to proceed.

1. Locate the newly imported print mode in the list.
2. Double-click the print mode file to open it.

1. Go to the “Color Layer” tab.
2. Click on “Processing Options.”
3. Confirm the maximum ink setting is set to 40%.
4. Make sure “Underbase” is selected, or “Underbase and Highlight” if required.

1. Click “Save.”
2. Click “Close.”
3. The new print mode is now ready to use.

You can now start printing using your newly imported print mode.