Digirip - How to Crop/Split an Image

1. This guide explains how to crop or split an image in DigiRIP by using a custom queue and media size.
2. This method is useful when an image exceeds the printable width and needs to be divided.

1. Click **Queue (Q)**.
2. Select **Manage Queues**.
3. Click **Copy Queue**.
4. Name the new queue: Example: **Crop**
5. Click **OK**.
6. Close the window.

1. Double-click the newly created queue to open **Q Properties**.
2. Select **Media Setup**.
3. Click **Add New Media**.
4. Set the media width to **11 inches**.
5. Click **OK** to save.

1. Import your image into the queue.
2. Rotate the image if needed (example: **90°**) to better visualize cropping.
3. Resize the image larger if necessary so it exceeds the media width.
4. A **red border** indicates the image exceeds the printable area.

1. Go to the **Job** tab.
2. Click **Crop**.
3. A divider line will appear at the **11-inch** mark, showing where the crop will occur.
4. Click **Create**.
5. The image will now be cropped at the defined width.

1. Go to the **Page** tab.
2. Change the media width back to the original size.
3. Confirm the layout updates correctly.

• Example: **13 inches**.

This completes the process for cropping or splitting an image in DigiRIP.