Digirip - How to Change the Input ICC Profile

00:00:02

1. Open DigiRIP.
2. Access Q Properties using one of the following methods: Double-click the queue tab you want to modify, or

• Select the queue tab, then click Q in the top menu and select Properties.

00:00:02

1. In the Q Properties dialog, select Color Layer.
2. Click ICC Profile.
3. Review the current input profile settings.

00:00:02

1. Note that the input profile is set to Custom.
2. Confirm the default behavior: RGB images use sRGB.

• CMYK images use ISO Coated.

00:00:47

1. Click the CMYK input profile drop-down menu.
2. Select sRGB + CADlink Wide to change how CMYK images are interpreted.
3. Use this option if printed colors are not accurate or desirable.

00:00:47

1. Click the main input profile drop-down menu.
2. Select CADlink RGB + CADlink Wide.
3. Understand that: sRGB is the standard color gamut.
4. Use expanded gamut profiles to help achieve specific color targets.

• CADlink RGB and CADlink Wide provide an expanded color gamut.

00:01:30

1. Click OK to save the changes.
2. Import a new job into the queue.
3. If a job already exists in the reserve area: Remove the existing job.

• Reimport the job to apply the new input profile.