Digirip - How to Apply the ColorBar (aka Confidence Strip)

1. This guide explains how to add a **color bar**, also known as a **confidence strip**, in DigiRIP.
2. Confidence strips help verify color output and print consistency.

You can access **Q Properties** in either of the following ways:

1. Double-click a queue tab.
2. Click **Queue (Q)** at the top menu and select **Properties**.

1. In **Q Properties**, click **Print Labels**.
2. Locate **Enable Confidence Strips**.
3. Check the box to enable it.

1. Choose where the confidence strip appears: Top Left
2. Adjust the **Lead-In** amount if needed.

• Top Right

1. Locate **Apply Processing Options**.
2. Recommended: Leave this option **unchecked**.

1. Click **OK** to save the settings.
2. Start printing.
3. The color bar (confidence strip) will now appear on your prints.

This completes the process for adding a color bar (confidence strip) in DigiRIP.