Flatbed cutting
Contour cuts from a flat bed
Sheets lie flat on the bed and the head runs the contour of each shape, so a gang sheet comes off as individual pieces.
Cutters · 28 in
Arc 127
The cutter that finds the shape itself
An auto-fed flatbed cutter for contour and die cutting.
- 28 in
- working width
- 110/220V
- power
- 485 lb
- weight
- Auto contour extraction
- in short
Features
What is inside the Arc 127
Auto contour extraction
No cut file to draw
The cut path is taken from the artwork itself, so a sheet of transfers goes from the printer to the cutter without anyone tracing outlines.
Roll feed
Feeds straight from the roll
Printed DTF film feeds off the roll onto the bed, so a roll of transfers is cut without being sheeted first.
Tool head
The head that does the cutting
The head carries the blade and rides a rail across the full bed width.
Collection basket
Finished pieces land in the basket
Cut pieces drop into a basket at the front, so the bed is clear for the next sheet.
The finished cut
Peel and go
A clean kiss-cut lifts off the backing in one piece.
What you will actually touch
Tech specs
Arc 127
Working width28 in
Power110/220V
Dimensions (W×D×H)57.5 × 51.2 × 39.4 in
Weight485 lb
Pairs withEvery Prestige setup
Want to see it run first?
Request a live demo and watch the Arc 127 in line with a Prestige printer before you decide.
Book a demo