Steps
- Select the job in the queue.
- Click the Soft Proof or Color Replacement Preview button in the top-right corner.
- Allow Digital Factory to render the job in the layout preview using the queue’s print mode.
DigiRIP DTG & Digital Factory
How To Make Simple Color Adjustments In Digital Factory
Written out step by step, with the video alongside.
Adjusting Job Color Settings and Applying Color Adjustments to a QueueSECTION
Previewing a Job Using the Queue Print Mode 00:00:10
Written steps3
Adjusting Colors for a Single Print Job
00:00:40
- Ensure the job is selected in the queue.
- Click the Color Adjust button at the bottom of the Job tab.
- In the Easy Color Adjustments window, adjust Brightness using the slider or enter a value in the field on the right.
- Adjust Saturation using the slider or enter a value in the field on the right.
- Click OK to apply the changes.
- Click the Soft Proof or Color Replacement Preview button in the top-right corner.
- Review the updated preview showing the adjusted colors.
Applying Recurring Color Adjustments to an Entire Queue
00:01:18
What you need
- All new jobs added to this queue will automatically use the adjusted color settings
- Existing jobs are not retroactively changed unless manually adjusted
- Queue-based color adjustments help reduce repetitive setup during production
- Identify a print medium that consistently requires color adjustment.
- Click the Q tab.
- Click the Color Adjust button at the bottom of the queue settings.
- Adjust the color sliders to the desired values.
- Click OK to save the changes.
Stuck on a step?
Our US tech team answers on Discord, and it is the fastest route to a person who knows this machine.