How to install DigiRIP

1. After purchasing a DTF Station printer or DigiRIP software, you will receive a download link via email.
2. A 15-day free trial is also available: Go to dtfstation.com.

• Use the search bar and search for **DigiRIP**.
• Select **Software Trial** to begin the download.

1. Once the download is complete, locate the installation icon.
2. Double-click the installer to begin.
3. Select your language and click **OK**.
4. Follow the InstallShield Wizard.
5. Read and accept the terms and conditions.
6. Click **Next**.

1. Make sure **Full Install – DigiRIP Pro** is selected.
2. Click **Next**.
3. Select the folder location where the application will be installed.
4. Click **Next** to confirm.

1. The software installation will begin.
2. Additional content will download afterward (a few more minutes).
3. Click **Finish** when complete.
4. Open the **DigiRIP** application.

• Installation time: approximately **6–8 minutes**.

1. When DigiRIP opens, the first prompt will ask for display units.
2. Click **OK**.
3. Enter your registration code from the email, or: Select the **15-day free trial** if you do not have your code yet.

• Select **Inches**.
• Set decimals to **2**.

1. Click **Install Printer**.
2. Choose the printer model you are using: For Prestige A3 Plus R or A3 Plus, select **Prestige A3 DTF V2**.
3. Click **OK**.
4. Make sure **New printer package from server** is selected.
5. Click **Next** to install the package.

• In this example, the **Prestige A4** printer is selected.

1. After installation, open the drop-down menu.
2. Select the printer connected via USB.
3. If the printer does not appear: Confirm the printer is powered on.
4. Click **Next**, then **Finish**.
5. If prompted, click **Allow Access**.

• Confirm the USB cable is properly connected.
• Confirm the computer is detecting the printer.

1. If the printer does not install correctly: Go to **Queue Manage Queues**.
2. For the Prestige A4 example: Select **Epson 808 Series**.
3. Wait for the device installation to complete.
4. Click **Close** when finished.

• Select the correct USB port.

1. Click the **Printer Status and Settings** icon.
2. Confirm: Printer status

• Ink levels
• Ability to run head cleans or nozzle checks

1. The top-right corner shows how many days remain in your free trial.
2. If you purchased the full version: Go to **Help**.
3. Confirm registration to fully activate DigiRIP.

• Select **Register**.
• Enter your activation code and required information.

This completes the download, installation, printer setup, and activation process for DigiRIP.