Discontinued - DTF Station DTF with DTG Ultimate Bundle

Kit Includes:

• DTF Station Phoenix Air 16 x 20 Curing Oven for DTF
• DTF Station Seismo S20 DTF Powder Station
  
• DTF Station Transfer Film for Direct to Film - 14" x 16" Sheet / 200
• Color Prime Hot Melt Powder for Direct to Film

Price: $2,499 / Saving: $333.98

• Made specifically for DTG Printer users to take advantage of the power of DTF printing, this bundle has all the equipment and supplies you'll need to DTF with DTG.

DTF Station Phoenix Air 16 x 20 Curing Oven for DTF

Phoenix Air 16x20 Operation Manual

Note: It is recommended to turn on the air purifier ONLY while the oven timer is running. Leaving the air purifier on for prolonged periods of time may increase the overall temperature of the oven beyond recommended curing temperature.

The Phoenix Air 16x20 Curing Oven is perfect for curing large film sizes, such as 13" x 19", 14" x 16", 16" x 20", and more! This oven comes with a purifier unit built-in to ensure the safety of your production space. It has a digital control unit that is easy to set and allows precise settings of temperature and time for consistent results. A fusing process is started at the touch of a button. After the set time has elapsed, an acoustic signal sounds alerting you to remove the transfer film.

Note: Unlike the previous Phoenix 16x20 Curing Oven, the Phoenix Air 16x20 oven uses an open-top/platform, rather than a tray, to cure films. See the Phoenix A3+ Curing Oven and A2 Curing Oven for similar heating methods.

Phoenix Air 16x20 Curing Oven can be bundled with the Prestige A3+R DTF Printer.

What's Included:

• Handles come unassembled
• Power cord
• Training Video
• Warranty Policy
• Lifetime Tech Support*
  • *Only for active customers who have purchased DTF inks or supplies within the last 2 months

Features:

• Cure Transfers within a minute at 230~248°F
• Bottom Heating Element Rather than Top
• Self Contained Purification system
• Replace Filter 1~3 months depending on usage

Benefits:

• Easy to use
• Built-in purifier - save space & money

Specifications:

• Voltage: 110V
• Power: 0.88KW
• Temperature Range: 0-150°C / 300°F
• Machine Size: 29"W x 21"D x 7.75"H
• Packaging Size: 31"W x 25"D x 10.75"H
• Product Weight: 30 lbs
• Packaging Weight: 35 lbs

----------------------------------------

Seismo S20 DTF Powder Station

Seismo S20 DTF Powder Station Manual

Benefits:

Features:

----------------------------------------

DTF Station Transfer Film for Direct to Film - 14" x 16" Sheet / 100

DTF Station Warm Peel Film - Sheets

Features:

1. High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
   

2. Hot Peel: Peel off the film without a long wait after the first press.

3. Single Side Matte: Easily distinguish the print side.
4. Different DTF Film Sizes: Available in A3 (11.69"x16.5") and 14"x16"
5. Compatible with any DTF printer on the market

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press,
   Option 1: Wait for 4-6 seconds and remove the film gently
   Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

----------------------------------------

DTF Station Hot Melt Powder for Direct to Film

Hot Melt Powder Material Safety Data Sheet

Formulated for use during DTG Transfer (DTF), DTF Station adhesive powder is a crucial part of any DTF printing pipeline. Cover your DTG Transfer media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!

Features:

• After baking the powder, solid white for more vibrant colors
• Even and regular particles for quality graphics and good adherence
• Finely coated film means no pinholes!

Sizes:

• 1 lb
• 1 kg
• 20 kg

Instructions (for use with DTF Station Warm Peel film):

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press,
   Option 1: Wait for 4-6 seconds and remove the film gently
   Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

*This product has no affiliation with Epson and is not endorsed by Epson.

*Settings and directions to print DTF with your F2000/2100 using Garment Creator*

• The basic concept for DTF is to print CMYK first then WHITE on top of it. ALWAYS MIRROR YOUR IMAGE FIRST!
• Most of you will be printing onto standard A3 and A4 sheets. Utilize every inch of space as you can to save on time and cost of materials. We call that gang sheeting. One benefit of GC is that it allows multiple images to be uploaded at the same time for printing. Those who order Plastisol Transfers will already know this. The two most common platens I use are 10 x 12 (A2) and 16 x 20 (A3). I place the sheet towards the top middle as a guide and measure how much empty space I have on the sides and bottom because the sheets will be smaller than your platen. I use tape to hold in at least 2 corners to prevent the sheet from shifting while printing.
• Using GC for DTF is very much the same as with DTG. The only difference is you are reversing the cmyk/white color process and mirroring your image.
• If your image has black in it then click on Black Garment. That will prevent GC from printing black unnecessarily.
• For all other colors including white, use (Dark Color).
• After selecting the proper color choice, you need to tinker with your color and white levels. For me personally I use level 2 for color and level 1 for white. I leave ink density to zero. And make sure you leave enough time in between passes in Pause between Passes (sec). This is very important. I like to choose 30-60 seconds
• Under White Management it is very important to check “OFF” first before you print your CMYK pass. This will allow your color layer to go down first.
• After your color pass is done then you go back to white management and click “ON”. Be sure you have enough seconds in your “Pause between passes (sec)” or else your printer will print another CMYK pass right after your white pass. YOU DO NOT WANT THAT! So you MUST manually press cancel on your printer before it does so.

Unfortunately, Garment Creator was not designed for DTF so it is necessary to turn white on and off for every print you do.

WARNING

• Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powderr or fumes. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately.