Skip to product information
1 of 1

DTF Station

Ecofreen DTF Hot Peel Film - Roll

Ecofreen DTF Hot Peel Film - Roll

Size

NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink

Ecofreen Premium Plus film has now been upgraded to Ecofreen Ultimate film at no additional cost.

Features:

  • After baking the powder, solid white for more vibrant colors. Even and regular particles for the fine quality of graphic and good adherence. Finely coated film for no pinholes!

Sizes:

  • 11.8" x 109 Yard (30cm x 100m) (Pack of 2)
  • 13" x 109 Yard (33cm x 100m) (Pack of 2)
  • 16" x 109 Yard (40.64cm x 100m) (Pack of 1) - NOT Compatible with DTF Station Seismo A16 Powder Shaker
  • 23.6" x 109 Yard (60cm x 100m) (Pack of 1)

Instructions:

  1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
  2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
  3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
  4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
  5. After the first press,
    Option 1: Wait for 4-6 seconds and remove the film gently
    Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
  6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

WARNING

  • Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately.

NOTE

  • DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
  • Transfer Film does not require pre-treatment and it uses minimum 75% less DTG inks on to get good quality.
  • The designed fabrics or printed shirts have a good wash characteristics.
  • The fabric has very slight hand feel touch.
  • The process is much faster than Vinyl printing (Vinyl Printer).

NOTE: DTF Station Film A3 and A3+ Sheets and A3+ (13") Rolls have returned to their normal pricing, after a temporary price decrease.

View full details