DTF Station Warm Peel DTF Film Rolls - Standard

Features:

1. Warm Peel: Peel off the film without a long wait after the first press.
   
2. Single Side Matte: Print side is matte, so it is easily distinguishable from the glossy backside.
   

Compatible with:

• Any DTF printer on the market - **Recommended use with a roll printer.**
• Looking for DTF film sheets instead? Go here.

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo DTF Powder Shaker to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5 minutes). Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 320°F for 15sec with medium pressure.
5. After the first press, wait for 4-6 seconds, rub the surface a few times with a cloth, and remove the film gently.
   
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.